NETGEAR M4100 Series ProSAFE

Utility Commands
360
M4100 Series ProSAFE Managed Switches
no logging email message-type to-addr
This command removes the configured to-addr field of email.
logging email from-addr
This command configures the email address of the sender (that is, the switch).
no logging email from-addr
This command removes the configured email source address.
logging email message-type subject
This command configures the subject line of the email for the specified type.
• For urgent messages: Urgent Log Messages
• For non-urgent messages: Non-Urgent Log Messages
no logging email message-type subject
This command removes the configured email subject for the specified message type and
restores it to the default email subject.
Format no logging email message-type {urgent |non-urgent |both} to-addr
<to-email-addr>
Mode Global Config
Default switch@netgear.com
Format logging email from-addr <from-email-addr>
Mode Global Config
Format no logging email from-addr <from-email-addr>
Mode Global Config
Default
Format logging email message-type {urgent |non-urgent |both} subject
<subject>
Mode
Global Config
Format no logging email message-type {urgent |non-urgent |both} subject
Mode Global Config