NETGEAR M4100 Series ProSAFE

Utility Commands
397
M4100 Series ProSAFE Managed Switches
ip host
Use this command to define static host name-to-address mapping in the host cache. The
<name> parameter is the host name. The <ip address> parameter is the IP address of the
host.
no ip host
Use this command to remove the name-to-address mapping.
ipv6 host
Use this command to define static host name-to-IPv6 address mapping in the host cache.
The <name> parameter is the host name. The <ipv6-address> parameter is the IPv6
address of the host.
no ipv6 host
Use this command to remove the static host name-to-IPv6 address mapping in the host
cache.
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System
(DNS) queries. The parameter <number> indicates the number of times to retry sending a
DNS query to the DNS server. This number ranges from 0 to 100.
Default none
Format ip host <name> <ipaddress>
Mode Global Config
Format no ip host <name>
Mode Global Config
Default none
Format ipv6 host <name> <ipv6-address>
Mode Global Config
Format no ipv6 host <name>
Mode Global Config
Default 2
Format ip domain retry <number>
Mode Global Config