NETGEAR M4100 Series ProSAFE User Manual

Management Commands
450
M4100 Series ProSAFE Managed Switches
serial baudrate
Use this command to specify the communication rate of the terminal interface. The supported
rates are 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
no serial baudrate
Use this command to set the communication rate of the terminal interface.
serial timeout
Use this command to specify the maximum connect time (in minutes) without console activity.
A value of 0 indicates that a console can be connected indefinitely. The time range is 0–160.
no serial timeout
Use this command to set the maximum connect time (in minutes) without console activity.
login authentication
Use this command in line configuration mode to specify a login authentication method list for
remote telnet or console.
Default 115200
Format serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 | 57600 |
115200}
Mode Line Config
Format no serial baudrate
Mode Line Config
Default 5
Format serial timeout <0-160>
Mode Line Config
Format no serial timeout
Mode Line Config
Format login authentication {default | <list-name>}
Mode Line Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)