Switching Commands
186
M4100 Series ProSAFE Managed Switches
show lldp
Use this command to display a summary of the current LLDP configuration.
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific
interface or for all interfaces.
Format show lldp
Mode Privileged Exec
Term Definition
Transmit Interval How frequently the system transmits local data LLDPDUs, in seconds.
Transmit Hold
Multiplier
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
Re-initialization
Delay
The delay before re-initialization, in seconds.
Notification
Interval
How frequently the system sends remote data change notifications, in seconds.
Format show lldp interface {<slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can
be 0 (Port Description), 1 (System Name), 2 (System Description), or 3 (System
Capability).
Mgmt Shows whether the interface transmits system management address information in the
LLDPDUs.
To Next Page
Loading...
Need help?
General
