NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
148
M4100 Series ProSAFE Managed Switches
ip arp inspection vlan
Use this command to enable Dynamic ARP Inspection on a list of comma-separated VLAN
ranges.
no ip arp inspection vlan
Use this command to disable Dynamic ARP Inspection on a list of comma-separated VLAN
ranges.
ip arp inspection validate
Use this command to enable additional validation checks like source-mac validation,
destination-mac validation, and ip address validation on the received ARP packets. Each
command overrides the configuration of the previous command. For example, if a command
enables src-mac and dst-mac validations, and a second command enables IP validation only,
the src-mac and dst-mac validations are disabled as a result of the second command.
no ip arp inspection validate
Use this command to disable the additional validation checks on the received ARP packets.
ip arp inspection vlan logging
Use this command to enable logging of invalid ARP packets on a list of comma-separated
VLAN ranges.
Default disabled
Format ip arp inspection vlan <vlan-list>
Mode Global Config
Format no ip arp inspection vlan <vlan-list>
Mode Global Config
Default disabled
Format ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode Global Config
Format no ip arp inspection validate {[src-mac] [dst-mac] [ip]}
Mode Global Config
Default enabled
Format ip arp inspection vlan <vlan-list> logging
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)