Utility Commands
393
M4100 Series ProSAFE Managed Switches
show ip dhcp pool configuration
This command displays pool configuration. If all is specified, configuration for all the pools
is displayed.
• Privileged EXEC
• User EXEC
For the dynamic pool type, the fields that are shown in the following table are displayed.
For the manual pool type, the fields that are shown in the following table are displayed.
show ip dhcp server statistics
This command displays DHCP server statistics.
• Privileged EXEC
• User EXEC
Format show ip dhcp pool configuration {<name> | all}
Modes
Field Definition
Pool Name The name of the configured pool.
Pool Type The pool type.
Lease Time The lease expiration time of the IP address assigned to the client.
DNS Servers The list of DNS servers available to the DHCP client.
Default Routers The list of the default routers available to the DHCP client.
Field Definition
Network The network number and the mask for the DHCP address pool.
Field Definition
Client Name The name of a DHCP client.
Client Identifier The unique identifier of a DHCP client.
Hardware
Address
The hardware address of a DHCP client.
Hardware
Address Type
The protocol of the hardware platform.
Host The IP address and the mask for a manual binding to a DHCP client.
Format show ip dhcp server statistics
Modes
To Next Page
Loading...
Need help?
General
