Management Commands
512
M4100 Series ProSAFE Managed Switches
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
Command example:
(NETGEAR Switch) #show radius accounting statistics name Default_RADIUS_Server
RADIUS Accounting Server Name................. Default_RADIUS_Server
Host Address.................................. 192.168.37.200
Round Trip Time............................... 0.00
Requests...................................... 0
Retransmissions............................... 0
Responses..................................... 0
Malformed Responses........................... 0
Bad Authenticators............................ 0
Pending Requests.............................. 0
Timeouts...................................... 0
Unknown Types................................. 0
Packets Dropped............................... 0
show radius statistics
Use this command to display the summary statistics of configured RADIUS Authenticating
servers.
Format show radius statistics {<ipaddr> | <dnsname> | name <servername>}
Mode Privileged EXEC
Field Definition
servername The alias name to identify the server.
RADIUS Server Name The name of the authenticating server.
Server Host Address The IP address of the host.
Access Requests The number of RADIUS Access-Request packets sent to this server. This number
does not include retransmissions.
Access
Retransmissions
The number of RADIUS Access-Request packets retransmitted to this RADIUS
authentication server.
Access Accepts The number of RADIUS Access-Accept packets, including both valid and invalid
packets, that were received from this server.
To Next Page
Loading...
Need help?
General
