EasyManuals Logo

NETGEAR M4100 Series ProSAFE User Manual

NETGEAR M4100 Series ProSAFE
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #162 background imageLoading...
Page #162 background image
Switching Commands
162
M4100 Series ProSAFE Managed Switches
If you specify the <slot/port> values, the command displays the information that is
described in the following table.
If you specify the <vlan id> value, the command displays the information that is described
in the following table.
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Term Definition
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the interface.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the interface.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface before deleting the interface from the entry. This value may be
configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface because it did
not receive a report for a particular group on that interface. This value may be configured.
Multicast Router
Expiry Time
The amount of time to wait before removing an interface from the list of interfaces with
multicast routers attached. The interface is removed if a query is not received. This value
may be configured.
Term Definition
VLAN ID The VLAN ID.
IGMP Snooping
Admin Mode
Indicates whether IGMP Snooping is active on the VLAN.
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface, which is participating in the VLAN, before deleting the interface
from the entry. This value may be configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface, participating in
the VLAN, because it did not receive a report for a particular group on that interface. This
value may be configured.
Multicast Router
Expiry Time
The amount of time to wait before removing an interface that is participating in the VLAN
from the list of interfaces with multicast routers attached. The interface is removed if a
query is not received. This value may be configured.
Format show igmpsnooping mrouter interface <slot/port>
Mode Privileged EXEC

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General IconGeneral
Product TypeManaged Switch
Form FactorRack-mountable
LayerLayer 2/Layer 3
ManagementWeb-based, CLI, SNMP
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1x
DimensionsVaries by model
WeightVaries by model
Operating Temperature32°F to 122°F (0°C to 50°C)
Storage Temperature-20° to 70° C (-4° to 158° F)
PoE SupportYes (on select models)

Related product manuals