Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

M4100 Series ProSAFE Managed Switches

vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces.

The modes defined as follows:

With either option, VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q

VLAN Specification.

no vlan port acceptframe all

This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All

mode, untagged frames or priority frames received on this interface are accepted and

assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged

frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.

vlan port ingressfilter all

This command enables ingress filtering for all ports. If ingress filtering is disabled, frames

received with VLAN IDs that do not match the VLAN membership of the receiving interface

are admitted and forwarded to ports that are members of that VLAN.

Default all

Format vlan port acceptframe all {vlanonly | all}

Mode Global Config

Mode Definition

VLAN Only

mode

Untagged frames or priority frames received on this interface are discarded.

Admit All mode Untagged frames or priority frames received on this interface are accepted and assigned

the value of the interface VLAN ID for this port.

Format no vlan port acceptframe all

Mode Global Config

Default disabled

Format vlan port ingressfilter all

Mode Global Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General