NETGEAR M4100 Series ProSAFE

Switching Commands
28
M4100 Series ProSAFE Managed Switches
no spanning-tree auto-edge
This command disables auto-edge on the interface or range of interfaces.
spanning-tree bpdufilter
Use this command to enable BPDU Filter on an interface or range of interfaces.
no spanning-tree bpdufilter
Use this command to disable BPDU Filter on the interface or range of interfaces.
spanning-tree bpdufilter default
Use this command to enable BPDU Filter on all the edge port interfaces.
no spanning-tree bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
Format no spanning-tree auto-edge
Mode Interface Config
Default disabled
Format spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format no spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format spanning-tree bpdufilter
Mode Global Config
Default enabled
Format no spanning-tree bpdufilter default
Mode Global Config