Switching Commands
124
M4100 Series ProSAFE Managed Switches
The following output parameters are displayed.
show port-channel brief
This command displays the static capability of all port-channel (LAG) interfaces on the device
as well as a summary of individual port-channel interfaces.
• Privileged EXEC
• User EXEC
For each port-channel the following information is displayed:
show port-channel
This command displays an overview of all port-channels (LAGs) on the switch.
• Privileged EXEC
• User EXEC
Term Description
System Priority The administrative value of priority associated with the Partner’s System ID.
System ID The value representing the administrative value of the Aggregation Port’s protocol
Partner’s System ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the port priority for the protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.
Format show port-channel brief
Mode
Term Definition
Logical Interface The slot/port of the logical interface.
Port-channel
Name
The name of port-channel (LAG) interface.
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or dynamically maintained.
Mbr Ports The members of this port-channel.
Active Ports The ports that are actively participating in the port-channel.
Format show port-channel
Mode
To Next Page
Loading...
Need help?
General
