Management Commands
462
M4100 Series ProSAFE Managed Switches
no ip http java
Use this command to disable the Web Java mode. The Java mode applies to both secure
and unsecure web connections.
ip http session hard-timeout
Use this command to configure the hard time-out for unsecure HTTP sessions in hours.
Configuring this value to zero sets an infinite hard time-out. When this time-out expires, the
user must reauthenticate. This timer begins on initiation of the web session and is unaffected
by the activity level of the connection.
no ip http session hard-timeout
Use this command to restore the hard timeout for unsecure HTTP sessions to the default
value.
ip http authentication
Use this command to specify the authentication methods for http server users. The additional
methods of authentication are used only if the previous method returns an error, not if it fails.
To ensure that the authentication succeeds even if all methods return an error, specify none
as the final method in the command line. For example If none specified as an authentication
method after RADIUS, no authentication is used if the RADIUS server is down.
Format no ip http java
Mode Privileged EXEC
Default 24
Format ip http session hard-timeout <0-168>
Mode Privileged EXEC
Format no ip http session hard-timeout
Mode Privileged EXEC
Format ip http authentication <method1> [<method2> ...]
Mode Global ConfigC
Term Definition
Local Uses the local user name database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
To Next Page
Loading...
Need help?
General
