NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
179
M4100 Series ProSAFE Managed Switches
no port-security
This command disables port locking for one (Interface Config) or all (Global Config) ports.
• Global Config
• Interface Config
port-security max-dynamic
This command sets the maximum number of dynamically locked MAC addresses allowed on
a specific port.
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed
on a specific port to its default value.
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a
port
.
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default
value.
Format no port-security
Mode
Default 600
Format port-security max-dynamic <maxvalue>
Mode
Interface Config
Format no port-security max-dynamic
Mode Interface Config
Default 20
Format port-security max-static <maxvalue>
Mode Interface Config
Format no port-security max-static
Mode Interface Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)