Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

M4100 Series ProSAFE Managed Switches

no private-vlan

This command is used to restore normal VLAN configuration.

vlan (Private VLAN)

Use this command to enter the private vlan configuration. The VLAN range is 1-4094.

show vlan private-vlan

This command displays information about the configured private VLANs including primary

and secondary VLAN IDs, type (community, isolated, or primary) and the ports that belong to

a private VLAN.

• Privileged EXEC

• User EXEC

show interface ethernet switchport

This command displays the private VLAN mapping information for the switch interfaces.

• Privileged EXEC

• User EXEC

Format no private-vlan {association}

Mode

VLAN Config

Format vlan <vlan-list>

Mode Global Config

Format show vlan private-vlan [type]

Mode

Term Definition

Private -vlan Displays information about the configured private VLANs

type Displays only private VLAN ID and its type.

Primary Displays primary VLAN ID

Secondary Displays secondary VLAN ID

Type Displays secondary VLAN type

Ports Displays ports which are associated with a private VLAN

Format show interface ethernet <slot/port> switchport

Mode

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General