NETGEAR M4100 Series ProSAFE

Switching Commands
89
M4100 Series ProSAFE Managed Switches
show authentication methods
This command displays information about the authentication methods.
Command example:
Login Authentication Method Lists
________________________________
Console_Default: None
Network_Default:Local
Enable Authentication Lists
_____________________
Console_Default: Enable None
Network_Default:Enable
Line Login Method List Enable Method Lists
_____________________
Console Console_Default Console_Default
Telnet Network_Default Network_Default
SSH Network_Default Network_Default
http : Local
https : Local
dot1x :
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
If you do not use the optional <slot/port> parameters, the command displays the global
dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN Creation mode.
Format show authentication methods
Mode Privileged EXEC
Format show dot1x [{summary {<slot/port> | all} | detail <slot/port> |
statistics <slot/port>]
Mode Privileged EXEC
Term Definition
Administrative
Mode
Indicates whether authentication control on the switch is enabled or disabled.
VLAN
Assignment
Mode
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is
allowed (enabled) or not (disabled).