Switching Commands
90
M4100 Series ProSAFE Managed Switches
If you use the optional parameter summary {<slot/port> | all}, the dot1x configuration
for the specified port or all ports are displayed.
If you use the optional parameter detail <slot/port>, the detailed dot1x configuration for
the specified port is displayed.
Dynamic VLAN
Creation Mode
Indicates whether the switch can dynamically create a RADIUS-assigned VLAN if it does
not currently exist on the switch.
Monitor Mode Indicates whether the Dot1x Monitor mode on the switch is enabled or disabled.
Term Definition
Interface The interface whose configuration is displayed.
Control Mode The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based | authorized | unauthorized.
Operating
Control Mode
The control mode under which this port is operating. Possible values are authorized |
unauthorized.
Reauthentication
Enabled
Indicates whether re-authentication is enabled on this port.
Port Status Indicates whether the port is authorized or unauthorized. Possible values are authorized
| unauthorized.
Term Definition
Port The interface whose configuration is displayed.
Protocol Version The protocol version associated with this port. The only possible value is 1,
corresponding to the first version of the dot1x specification.
PAE Capabilities The port access entity (PAE) functionality of this port. Possible values are Authenticator
or Supplicant.
Control Mode The configured control mode for this port. Possible values are force-unauthorized |
force-authorized | auto | mac-based.
Authenticator PAE
State
Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized. When MAC-based authentication is enabled
on the port, this parameter is deprecated.
Backend
Authentication
State
Current state of the backend authentication state machine. Possible values are
Request, Response, Success, Fail, Timeout, Idle, and Initialize. When MAC-based
authentication is enabled on the port, this parameter is deprecated.
Quiet Period The timer used by the authenticator state machine on this port to define periods of time
in which it will not attempt to acquire a supplicant. The value is expressed in seconds
and will be in the range 0 and 65535.
Term Definition
To Next Page
Loading...
Need help?
General
