Management Commands
483
M4100 Series ProSAFE Managed Switches
no aaa authentication dot1x
Use this command to remove the authentication at login.
aaa accounting
The command creates an accounting method list. This list is identified by the default
keyword or by a user-specified <list-name>. Accounting records, when enabled for a
line-mode, can be sent at both the beginning and at the end (start-stop) or only at the end
(stop-only). If none is specified, accounting is disabled for the specified list. If tacacs is
specified as the accounting method, accounting records are notified to a TACACS+ server. If
radius is the specified accounting method, accounting records are notified to a RADIUS
server.
For the same set of accounting type and list name, the administrator can change the record
type or the methods list without having to first delete the previous configuration.
Note the following:
• A maximum of five accounting method lists can be created for each exec and commands
type.
• The same list-name can be used for both exec and commands accounting type.
• AAA accounting for commands with RADIUS as the accounting method is not supported.
Format no aaa authentication dot1x default
Mode Global Config
Format aaa accounting {exec | commands} {default | <list-name>} {start-stop
| stop-only | none} <method1> [<method2>…]
Mode Global Config
Term Definition
exec Provides accounting for user EXEC terminal sessions.
commands Provides accounting for all user-executed commands.
default The default list of methods for accounting services.
<list-name> Character string used to name the list of accounting methods.
start-stop Sends a start accounting notice at the beginning of a process and a stop
accounting notice at the end of a process.
stop-only Sends a stop accounting notice at the end of the requested user process.
none Disables accounting services on this line.
<method1>
[<method2>…]
Use either tacacs or radius for accounting purpose.
To Next Page
Loading...
Need help?
General
