NETGEAR M4100 Series ProSAFE User Manual

Routing Commands
233
M4100 Series ProSAFE Managed Switches
show arp switch (Address Resolution Protocol commands)
This command displays the contents of the switch’s Address Resolution Protocol (ARP)
table.
Term Definition
Age Time
(seconds)
The time it takes for an ARP entry to age out. This value is configurable. Age time is
measured in seconds.
Response Time
(seconds)
The time it takes for an ARP request timeout. This value is configurable. Response time
is measured in seconds.
Retries The maximum number of times an ARP request is retried. This value is configurable.
Cache Size The maximum number of entries in the ARP table. This value is configurable.
Dynamic Renew
Mode
Displays whether the ARP component automatically attempts to renew dynamic ARP
entries when they age out.
Total Entry
Count Current /
Peak
The total entries in the ARP table and the peak entry count in the ARP table.
Static Entry
Count Current /
Max
The static entry count in the ARP table and maximum static entry count in the ARP table.
Format show arp switch
Mode Privileged EXEC
Term Definition
IP Address The IP address of a device on a subnet attached to the switch.
MAC Address The hardware MAC address of that device.
Interface The routing slot/port associated with the device’s ARP entry.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)