NETGEAR M4100 Series ProSAFE User Manual

Multicast VLAN Registration Commands
226
M4100 Series ProSAFE Managed Switches
show mvr traffic
This command displays global MVR statistics.
The following table explains the output parameters.
Command example:
(NETGEAR Switch)#show mvr traffic
IGMP Query Received…........................................ 2
IGMP Report V1 Received….................................... 0
IGMP Report V2 Received….................................... 3
IGMP Leave Received…........................................ 0
IGMP Query Transmitted…..................................... 2
IGMP Report V1 Transmitted…................................. 0
IGMP Report V2 Transmitted…................................. 3
IGMP Leave Transmitted…..................................... 1
IGMP Packet Receive Failures…............................... 0
IGMP Packet Transmit Failures….............................. 0
Format show mvr traffic
Mode Privileged EXEC
Term Definition
IGMP Query Received Number of received IGMP queries
IGMP Report V1 Received Number of received IGMP reports V1
IGMP Report V2 Received Number of received IGMP reports V2
IGMP Leave Received Number of received IGMP leaves
IGMP Query Transmitted Number of transmitted IGMP queries
IGMP Report V1 Transmitted Number of transmitted IGMP reports V1
IGMP Report V2 Transmitted Number of transmitted IGMP reports V2
IGMP Leave Transmitted Number of transmitted IGMP leaves
IGMP Packet Receive Failures Number of failures on receiving the IGMP packets
IGMP Packet Transmit Failures Number of failures on transmitting the IGMP packets

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)