NETGEAR M4100 Series ProSAFE

Utility Commands
411
M4100 Series ProSAFE Managed Switches
no debug ip pimdm packet
Use this command to disable debug tracing of PIMDM packet reception and transmission.
debug ip pimsm packet
Use this command to trace PIMSM packet reception and transmission. Use this command to
trace PIMSM packet reception and transmission. If you use the receive option, only
received PIMSM packets are traced. If you use the transmit option, only transmitted
PIMDM packets are traced. When neither keyword is used in the command, then all PIMSM
packet traces are dumped. Vital information such as source address, destination address,
control packet type, packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
no debug ip pimsm packet
Use this command to disable debug tracing of PIMSM packet reception and transmission.
debug ip vrrp
Use this command to enable VRRP debug protocol messages.
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
Format no debug ip pimdm packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip pimsm packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip pimsm packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip vrrp
Mode Privileged EXEC
Format no debug ip vrrp
Mode Privileged EXEC