NETGEAR M4100 Series ProSAFE

Switching Commands
158
M4100 Series ProSAFE Managed Switches
no set igmp maxresponse
This command sets the max response time (on the interface or VLAN) to the default value.
• Global Config
• Interface Config
set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the
system, on a particular interface or VLAN. This is the amount of time in seconds that a switch
waits for a query to be received on an interface before the interface is removed from the list of
interfaces with multicast routers attached. The range is 0–3600 seconds. A value of 0
indicates an infinite time-out, that is, no expiration.
• Global Config
• Interface Config
no set igmp mcrtrexpiretime
This command sets the Multicast Router Present Expiration time to 0. The time is set for the
system, on a particular interface or a VLAN.
• Global Config
• Interface Config
Format no set igmp maxresponse
Mode
Format no set igmp maxresponse <vlan id>
Mode
VLAN Config
Default 0
Format set igmp mcrtrexpiretime <0-3600>
Mode
Format set igmp mcrtrexpiretime <vlan id> <0-3600>
Mode
VLAN Config
Format no set igmp mcrtrexpiretime
Mode
Format no set igmp mcrtrexpiretime <vlan id>
Mode
VLAN Config