Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Utility Commands

391

M4100 Series ProSAFE Managed Switches

no ip dhcp bootp automatic

This command disables the allocation of the addresses to the bootp client. The address are

from the automatic address pool.

ip dhcp conflict logging

This command enables conflict logging on DHCP server.

no ip dhcp conflict logging

This command disables conflict logging on DHCP server.

clear ip dhcp binding

This command deletes an automatic address binding from the DHCP server database. If you

specify *, the bindings corresponding to all the addresses are deleted. <address> is a valid

IP address made up of four decimal bytes ranging from 0 to 255. IP address 0.0.0.0 is

invalid.

clear ip dhcp server statistics

This command clears DHCP server statistics counters.

Format no ip dhcp bootp automatic

Mode Global Config

Default enabled

Format ip dhcp conflict logging

Mode Global Config

Format no ip dhcp conflict logging

Mode Global Config

Format clear ip dhcp binding {<address> | *}

Mode Privileged EXEC

Format clear ip dhcp server statistics

Mode Privileged EXEC

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General