Switching Commands
94
M4100 Series ProSAFE Managed Switches
show dot1x users
This command displays 802.1x port security user information for locally configured users.
802.1X Supplicant Commands
802.1X (“dot1x”) supplicant functionality is on point-to-point ports. The administrator can
configure the user name and password used in authentication and capabilities of the
supplicant port.
dot1x pae
Use this command to set the port’s dot1x role. The port can serve as either a supplicant or an
authenticator.
dot1x supplicant port-control
Use this command to set the ports authorization state (Authorized or Unauthorized) either
manually or by setting the port to auto-authorize upon startup. By default all the ports are
authenticators. If the port’s attribute must be moved from authenticator to supplicant or
supplicant to authenticator, use this command.
VLAN Assigned The reason the VLAN identified in the VLAN ID field has been assigned to the port.
Possible values are RADIUS, Unauthenticated VLAN, or Default. When the VLAN
Assigned reason is Default, it means that the VLAN was assigned to the port because
the PVID of the port was that VLAN ID.
Session Timeout This value indicates the time for which the session is valid. The time period in seconds is
returned by the RADIUS server on authentication of the port. This value is valid for the
port only when the port-control mode is not MAC-based.
Session
Termination
Action
This value indicates the action to be taken once the session timeout expires. Possible
values are Default and Radius-Request. If the value is Default, the session is terminated
and client details are cleared. If the value is Radius-Request, a reauthentication of the
client is performed.
Format show dot1x users <slot/port>
Mode Privileged EXEC
Term Definition
Users Users configured locally to have access to the specified port.
Format dot1x pae {supplicant | authenticator}
Mode Interface Config
Term Definition
To Next Page
Loading...
Need help?
General
