NETGEAR M4100 Series ProSAFE

Switching Commands
159
M4100 Series ProSAFE Managed Switches
set igmp mrouter
This command configures the VLAN ID (<vlan id>) for which the multicast router mode
enabled.
no set igmp mrouter
This command disables multicast router mode for a particular VLAN ID (<vlan id>).
set igmp mrouter interface
This command configures the interface as a multicast router interface. When configured as a
multicast router interface, the interface is treated as a multicast router interface in all VLANs.
no set igmp mrouter interface
This command disables the status of the interface as a statically configured multicast router
interface.
set igmp report-suppression
Use this command to suppress the IGMP reports on a VLAN. In order to optimize the number
of reports traversing the network with no added benefits, a Report Suppression mechanism is
implemented. When more than one client responds to an MGMD query for the same
Multicast Group address within the max-response-time, only the first response is forwarded
to the query and others are suppressed at the switch.
Format set igmp mrouter <vlan id>
Mode Interface Config
Format no set igmp mrouter <vlan id>
Mode Interface Config
Default disabled
Format set igmp mrouter interface
Mode Interface Config
Format no set igmp mrouter interface
Mode Interface Config
Default Disabled
Format set igmp report-suppression <1-4093>
Mode VLAN Config