NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
377
M4100 Series ProSAFE Managed Switches
no sntp unicast client poll-timeout
This command will reset the poll timeout for SNTP unicast clients to its default value.
sntp unicast client poll-retry
This command will set the poll retry for SNTP unicast clients to a value from 0 to 10.
no sntp unicast client poll-retry
This command will reset the poll retry for SNTP unicast clients to its default value.
sntp server
This command configures an SNTP server (a maximum of three). The optional priority can be
a value of 1-3, the version a value of 1-4, and the port id a value of 1-65535.
no sntp server
This command deletes a server from the configured SNTP servers.
Format no sntp unicast client poll-timeout
Mode Global Config
Default 1
Format sntp unicast client poll-retry <poll-retry>
Mode Global Config
Format no sntp unicast client poll-retry
Mode Global Config
Format sntp server {<ipaddress> | <ipv6address> | <hostname>} [<priority>
[<version> [<portid>]]]
Mode Global Config
Format no sntp server remove {<ipaddress> | <ipv6address> | <hostname>}
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)