Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

146

M4100 Series ProSAFE Managed Switches

clear ip dhcp snooping binding

Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific

interface.

• Privileged EXEC

• User EXEC

clear ip dhcp snooping statistics

Use this command to clear all DHCP Snooping statistics.

• Privileged EXEC

• User EXEC

show ip verify source

Use this command to display the IPSG configurations on all ports.

• Privileged EXEC

• User EXEC

• ip-mac: User has configured MAC address filtering on this interface.

• ip: Only IP address filtering on this interface.

Command example:

(NETGEAR Switch) #show ip verify source

Interface Filter Type IP Address MAC Address Vlan

--------- ----------- --------------- ----------------- -----

0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10

0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10

Format clear ip dhcp snooping binding [interface <slot/port>]

Mode

Format clear ip dhcp snooping statistics

Mode

Format show ip verify source

Mode

Term Definition

Interface Interface address in slot/port format.

Filter Type Is one of two values:

IP Address IP address of the interface

MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is

empty. If port security is disabled on the interface, then the MAC Address field displays

“permit-all.”

VLAN The VLAN for the binding rule.

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General