Switching Commands
174
M4100 Series ProSAFE Managed Switches
show mldsnooping mrouter vlan
Use this command to display information about statically configured multicast router-attached
interfaces.
show mac-address-table mldsnooping
Use this command to display the MLD Snooping entries in the Multicast Forwarding
Database (MFDB) table.
Term Definition
Interface Shows the interface on which multicast router information is being displayed.
Multicast Router
Attached
Indicates whether multicast router is statically enabled on the interface.
VLAN ID Displays the list of VLANs of which the interface is a member.
Format show mldsnooping mrouter vlan <slot/port>
Mode Privileged EXEC
Term Definition
Interface Shows the interface on which multicast router information is being displayed.
VLAN ID Displays the list of VLANs of which the interface is a member.
Format show mac-address-table mldsnooping
Mode Privileged EXEC
Term Definition
VLAN ID The VLAN in which the MAC address is learned.
MAC Address A multicast MAC address for which the switch has forwarding or filtering information. The
format is 6 two-digit hexadecimal numbers that are separated by colons, for example
01:23:45:67:89:AB.
Type The type of entry, which is either static (added by the user) or dynamic (added to the
table as a result of a learning process or protocol.)
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
To Next Page
Loading...
Need help?
General
