Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

M4100 Series ProSAFE Managed Switches

vlan

This command creates a new VLAN and assigns it an ID. The ID is a valid VLAN

identification number (ID 1 is reserved for the default VLAN). The vlan-list contains VlanId's in

range <1-4093>. Separate non-consecutive IDs with ',' and no spaces and no zeros in

between the range; Use '-' for range.

no vlan

This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1

is reserved for the default VLAN). The vlan-list contains VlanId's in range <1-4093>.

Separate non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use

'-' for range.

vlan acceptframe

This command sets the frame acceptance mode per interface. For VLAN Only mode,

untagged frames or priority frames received on this interface are discarded. For Admit All

mode, untagged frames or priority frames received on this interface are accepted and

assigned the value of the interface VLAN ID for this port. With either option, VLAN tagged

frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.

no vlan acceptframe

This command resets the frame acceptance mode for the interface to the default value.

Format vlan <vlan-list>

Mode VLAN Config

Format no vlan <vlan-list>

Mode VLAN Config

Default all

Format vlan acceptframe {untaggedonly | vlanonly | all}

Mode Interface Config

Format no vlan acceptframe

Mode Interface Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General