Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Power over Ethernet Commands

322

M4100 Series ProSAFE Managed Switches

no poe priority

Use this command to set the priority to the default.

• Global Config

• Interface Config

poe reset

Use this command to reset the PoE state of every port (in global mode) or a specific port (in

interface mode). When the PoE port status is shown to be in an error state, this command

can be used to reset the PoE port. The command can also reset the power-delivering ports.

Note that this command takes effect only once after it is executed and cannot be saved

across power cycles.

• Global Config

• Interface Config

poe timer schedule name

Use this command to allow you to attach a timer schedule to a PoE port.

You can define a time schedule using the existing time range commands. This schedule has

start and stop times. When this timer schedule is applied to a PoE-enabled port, the

capability of the port to deliver power is af

fected. At the scheduled start time, the PoE port is

disabled such that it cannot deliver any power. At the scheduled stop time, the PoE port is

reenabled so that it can deliver power.

Note: For information about creating a timer schedule, see Time Range

Commands for Time-Based ACLs on page 309.

Default low

Format poe priority {crit | high | low}

Mode • Global Config

• Interface Config

Format no poe priority

Mode

Format poe reset

Mode

Format poe timer schedule <name>

Mode

Interface Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General