NETGEAR M4100 Series ProSAFE

Switching Commands
137
M4100 Series ProSAFE Managed Switches
DHCP Client Commands
DHCP Client can include vendor and configuration information in DHCP client requests
relayed to a DHCP server. This information is included in DHCP Option 60, Vendor Class
Identifier. The information is a string of 128 octets.
dhcp client vendor-id-option
Use this command to enable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
no dhcp client vendor-id-option
Use this command to disable the inclusion of DHCP Option-60, Vendor Class Identifier
included in the requests transmitted to the DHCP server by the DHCP client operating in the
switch.
dhcp client vendor-id-option-string
Use this command to set the DHCP Vendor Option-60 string to be included in requests
transmitted to the DHCP server by the DHCP client operating in the switch.
no dhcp client vendor-id-option-string
Use this command to clear the DHCP Vendor Option-60 string.
Format dhcp client vendor-id-option
Mode Global Config
Format no dhcp client vendor-id-option
Mode Global Config
Format dhcp client vendor-id-option-string <string>
Mode Global Config
Format no dhcp client vendor-id-option-string
Mode Global Config