NETGEAR M4100 Series ProSAFE

Switching Commands
136
M4100 Series ProSAFE Managed Switches
show dhcp l2relay stats interface
Use this command to display statistics specific to DHCP L2 Relay configured interface.
Command example:
(NETGEAR Switch) #show dhcp l2relay stats interface all
DHCP L2 Relay is Enabled.
Interface UntrustedServer UntrustedClient TrustedServer TrustedClient
MsgsWithOpt82 MsgsWithOpt82 MsgsWithoutOpt82 MsgsWithoutOpt82
--------- --------------- ----------------- ----------------- --------------
0/1 0 0 0 0
0/2 0 0 3 7
0/3 0 0 0 0
0/4 0 12 0 0
0/5 0 0 0 0
0/6 3 0 0 0
0/7 0 0 0 0
0/8 0 0 0 0
0/9 0 0 0 0
show dhcp l2relay agent-option vlan
Use this command to display the DHCP L2 Relay Option-82 configuration specific to VLAN.
Command example:
(NETGEAR Switch) #show dhcp l2relay agent-option vlan 5-10
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL—
6 Enabled Enabled netgear
7 Enabled Disabled --NULL—
8 Enabled Disabled --NULL—
9 Enabled Disabled --NULL—
10 Enabled Disabled --NULL--
Format show dhcp l2relay stats interface {all | <slot/port>}
Mode Privileged EXEC
Format show dhcp l2relay agent-option vlan <vlan-range>
Mode Privileged EXEC