Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Switching Commands

130

M4100 Series ProSAFE Managed Switches

macfilter adddest

Use this command to add the interface to the destination filter set for the MAC filter with the

<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a

6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter

must identify a valid VLAN.

Note: Configuring a destination port list is only valid for multicast MAC

addresses.

no macfilter adddest

This command removes a port from the destination filter set for the MAC filter with the

<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a

6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter

must identify a valid VLAN.

macfilter adddest all

This command adds all interfaces to the destination filter set for the MAC filter with the

<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a

6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter

must identify a valid VLAN.

Note: Configuring a destination port list is only valid for multicast MAC

addresses.

no macfilter adddest all

This command removes all ports from the destination filter set for the MAC filter with the

<macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a

6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter

must identify a valid VLAN.

Format macfilter adddest <macaddr> <vlanid>

Mode Interface Config

Format no macfilter adddest <macaddr> <vlanid>

Mode Interface Config

Format macfilter adddest all <macaddr> <vlanid>

Mode Global Config

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General