NETGEAR M4100 Series ProSAFE User Manual

Management Commands
461
M4100 Series ProSAFE Managed Switches
ip http server
Use this command to enable access to the switch through the Web interface. When access is
enabled, the user can login to the switch from the Web interface. When access is disabled,
the user cannot login to the switch’s web server. Disabling the Web interface takes effect
immediately. All interfaces are affected.
no ip http server
Use this command to disable access to the switch through the Web interface. When access
is disabled, the user cannot login to the switch's Web server.
ip http secure-server
Use this command to enable the secure socket layer for secure HTTP.
no ip http secure-server
Use this command to disable the secure socket layer for secure HTTP.
ip http java
Use this command to enable the Web Java mode. The Java mode applies to both secure and
unsecure web connections.
Default enabled
Format ip http server
Mode Privileged EXEC
Format no ip http server
Mode Privileged EXEC
Default disabled
Format ip http secure-server
Mode Privileged EXEC
Format no ip http secure-server
Mode Privileged EXEC
Default Enabled
Format ip http java
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)