Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Green Ethernet Commands

523

M4100 Series ProSAFE Managed Switches

Green Feature Support

The NETGEAR Managed switch supports the following green Ethernet power saving modes:

• Energy Detect Mode

• EEE Mode

The green Ethernet commands supported depends on the switch model.

Table 2. Green feature support

Energy-Detect Mode

When Energy-Detect mode is enabled, if communication on a port stops, the port circuitry

automatically shuts down for a short period. The port wakes up periodically to check for link

activity. If activity is detected, the port circuitry remains active. This allows performing

autonegotiation and saving power when there is no active link.

Note: Combination ports support both copper and fiber media. Energy

Detect mode only applies to copper media. If Energy Detect mode is

configured on a combination port, it will only function when a copper

media is active.

Model Energy-Detect EEE

M4100-D10-POE Yes No

M4100-D12G Yes Yes

M4100-50G-POE+ Yes Yes

M4100-26G-POE Yes Yes

M4100-50G Yes Yes

M4100-26G Yes Yes

M4100-50-POE Yes No

M4100-26-POE Yes No

M7100-24x No Yes

M4100-12GF Yes No

M4100-D12G-POE+ Yes No

M4100-24G-POE+ Yes No

M4100-12G-POE+ Yes No

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General