NETGEAR M4100 Series ProSAFE User Manual

Utility Commands
417
M4100 Series ProSAFE Managed Switches
For LS_REQ packet field definitions, the parameter that is shown in the following table is
displayed in the trace message.
For LS_UPD packet field definitions, the parameter that is shown in the following table is
displayed in the trace message.
For LS_ACK packet field definitions, the parameter that is shown in the following table is
displayed in the trace message.
no debug ospf packet
This command disables tracing of OSPF packets.
debug ipv6 ospfv3 packet
Use this command to enable OSPFv3 packet debug trace.
no debug ipv6 ospfv3 packet
Use this command to disable tracing of OSPFv3 packets.
Field Definition
Length Length of packet
Field Definition
Length Length of packet
Field Definition
Length Length of packet
Format no debug ospf packet
Mode Privileged EXEC
Default disabled
Format debug ipv6 ospfv3 packet
Mode Privileged EXEC
Format no debug ipv6 ospfv3 packet
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)