227
4
4. Routing Commands
This chapter describes the routing commands.
The chapter contains the following sections:
• Address Resolution Protocol (ARP) Commands
• IP Routing Commands
• Virtual LAN Routing Commands
• DHCP and BOOTP Relay Commands
• IP Helper Commands
• ICMP Throttling Commands
The commands in this chapter are in three functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. Every switch
command has a show command that displays the configuration setting.
• Clear commands clear some or all of the settings to factory defaults.
To Next Page
Loading...
