NETGEAR M4100 Series ProSAFE

Utility Commands
403
M4100 Series ProSAFE Managed Switches
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions
affecting their managed switch product.
CAUTION:
The output of the debug commands can be long and might adversely
affect system performance.
debug arp
Use this command to enable ARP debug protocol messages.
no debug arp
Use this command to disable ARP debug protocol messages.
debug auto-voip
Use this command to enable Auto VoIP debug messages. Use the optional parameters to
trace H323, SCCP, or SIP packets respectively.
Format show capture packets
Mode Privileged EXEC
Default disabled
Format debug arp
Mode Privileged EXEC
Format no debug arp
Mode Privileged EXEC
Default disabled
Format debug auto-voip [H323 | SCCP | SIP]
Mode Privileged EXEC