Name: NETGEAR M4100 Series ProSAFE
Brand: NETGEAR
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Utility Commands

344

M4100 Series ProSAFE Managed Switches

show fiber-ports optics-info

This command displays the SFP vendor related information such as vendor name, serial

number of the SFP, part number of the SFP. The values are derived from the SFP’s A0 table

using the I

C interface.

Format show fiber-ports optics-info {all | <slot/port>}

Mode Privileged EXEC

Field Description

Vendor Name The vendor name is a 16 character field that contains ASCII charac-

ters, left-aligned and padded on the right with ASCII spaces (20h). The

vendor name shall be the full name of the corporation, a commonly

accepted abbreviation of the name of the corporation, the SCSI com-

pany code for the corporation, or the stock exchange code for the cor-

poration.

Length (50um, OM2) This value specifies link length that is supported by the transceiver

while operating in compliance with applicable standards using 50

micron multimode OM2 [500MHz*km at 850nm] fiber. A value of zero

means that the transceiver does not support 50 micron multimode fiber

or that the length information must be determined from the transceiver

technology.

Length (62.5um, OM1) This value specifies link length that is supported by the transceiver

while operating in compliance with applicable standards using 62.5

micron multimode OM1 [200 MHz*km at 850nm, 500 MHz*km at

1310nm] fiber. A value of zero means that the transceiver does not

support 62.5 micron multimode fiber or that the length information must

determined from the transceiver technology

Vendor SN The vendor serial number (vendor SN) is a 16 character field that con-

tains ASCII characters, left-aligned and padded on the right with ASCII

spaces (20h), defining the vendor's serial number for the transceiver. A

value of all zero in the 16-byte field indicates that the vendor SN is

unspecified.

Vendor PN The vendor part number (vendor PN) is a 16-byte field that contains

ASCII characters, left aligned and added on the right with ASCII

spaces (20h), defining the vendor part number or product name. A

value of all zero in the 16-byte field indicates that the vendor PN is

unspecified.

Questions and Answers:

Need help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General