NETGEAR M4100 Series ProSAFE User Manual

Management Commands
447
M4100 Series ProSAFE Managed Switches
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
network mac-type
Use this command to specify whether the switch uses the burned in MAC address or the
locally administered MAC address.
no network mac-type
Use this command to reset the value of MAC address to its default.
network javamode
Use this command to specify whether the switch should allow access to the Java applet in
the header frame of the Web interface. When access is enabled, the Java applet can be
viewed from the Web interface. When access is disabled, the user cannot view the Java
applet.
no network javamode
Use this command to disallow access to the Java applet in the header frame of the Web
interface. When access is disabled, the user cannot view the Java applet.
Format network mac-address <macaddr>
Mode Privileged EXEC
Default burnedin
Format network mac-type {local | burnedin}
Mode Privileged EXEC
Format no network mac-type
Mode Privileged EXEC
Default enabled
Format network javamode
Mode Privileged EXEC
Format no network javamode
Mode Privileged EXEC

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)