EasyManuals Logo

NETGEAR M4100 Series ProSAFE User Manual

NETGEAR M4100 Series ProSAFE
578 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #406 background imageLoading...
Page #406 background image
Utility Commands
406
M4100 Series ProSAFE Managed Switches
debug dot1x packet
Use this command to enable dot1x packet debug trace.
no debug dot1x packet
Use this command to disable dot1x packet debug trace.
debug igmpsnooping packet
This command enables tracing of IGMP Snooping packets received and transmitted by the
switch.
no debug igmpsnooping packet
This command disables tracing of IGMP Snooping packets.
debug igmpsnooping packet transmit
This command enables tracing of IGMP Snooping packets transmitted by the switch.
Snooping should be enabled on the device and the interface in order to monitor packets for a
particular interface.
Default disabled
Format debug dot1x
Mode Privileged EXEC
Format no debug dot1x
Mode Privileged EXEC
Default disabled
Format debug igmpsnooping packet
Mode Privileged EXEC
Format no debug igmpsnooping packet
Mode Privileged EXEC
Default disabled
Format debug igmpsnooping packet transmit
Mode Privileged EXEC

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR M4100 Series ProSAFE and is the answer not in the manual?

NETGEAR M4100 Series ProSAFE Specifications

General IconGeneral
Product TypeManaged Switch
Form FactorRack-mountable
LayerLayer 2/Layer 3
ManagementWeb-based, CLI, SNMP
VLAN SupportYes
Quality of Service (QoS)Yes
Security FeaturesACLs, 802.1x
DimensionsVaries by model
WeightVaries by model
Operating Temperature32°F to 122°F (0°C to 50°C)
Storage Temperature-20° to 70° C (-4° to 158° F)
PoE SupportYes (on select models)

Related product manuals