NETGEAR M4100 Series ProSAFE User Manual

Management Commands
488
M4100 Series ProSAFE Managed Switches
Exec Authorization List Method
---------------------------- ------------------------------
dfltExecAuthList none undefined undefined undefined
Line Exec Method List
--------- ---------------------
Console dfltExecAuthList
Telnet dfltExecAuthList
SSH dfltExecAuthList
domain-name (Global Config)
The managed switch supports authentication based on domain name, in addition to the user
name and password. This command allows the switch to be configured in a domain. Users
can enable or disable domain functionality:
• Domain enabled. In this case, when the user enters only the user name, the managed
switch sends the domain name that is configured on the switch and the user name that
the user enters in the format "domainname\username” to the RADIUS server.
If the user enters the domain name and user name, the managed switch sends the
domain name and user name that the user enters in the format "domainname\username”
to the RADIUS server.
• Domain disabled. In this case, the domain name is not included when the user name is
sent to the RADIUS server.
no domain-name
This command is used to disable the domain-name in the managed switch.
domain-name enable (Global Config)
This command enables the domain name functionality.
Format domain-name <name>
Mode Global Config
Format no domain-name
Mode Global Config
Format domain-name enable
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)