NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
57
M4100 Series ProSAFE Managed Switches
If you enter the optional <vlanid> parameter, the command output also displays detailed
information, including interface information, for a specific VLAN. The ID is a valid VLAN
identification number.
• Include - This port is always a member of this VLAN. This is equivalent to
registration fixed in the IEEE 802.1Q standard.
• Exclude -
This port is never a member of this VLAN. This is equivalent to
registration forbidden in the IEEE 802.1Q standard.
• Autodetect -
To allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE 802.1Q standard.
• Include -
This port is always a member of this VLAN. This is equivalent to
registration fixed in the IEEE 802.1Q standard.
• Exclude -
This port is never a member of this VLAN. This is equivalent to
registration forbidden in the IEEE 802.1Q standard.
• Autodetect -
To allow the port to be dynamically registered in this VLAN via GVRP.
The port will not participate in this VLAN unless a join request is received on this
port. This is equivalent to registration normal in the IEEE 802.1Q standard.
• T
agged - Transmit traffic for this VLAN as tagged frames.
• Untagged -
Transmit traffic for this VLAN as untagged frames.
show vlan brief
This command displays a list of all configured VLANs.
• Privileged EXEC
• User EXEC
show vlan port
This command displays VLAN port information.
• Privileged EXEC
• User EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes. It is possible to set the
parameters for all ports by using the selectors on the top line.
Current The degree of participation of this port in this VLAN. The permissible values are:
Configured The configured degree of participation of this port in this VLAN. The permissible values
are:
Tagging The tagging behavior for this port in this VLAN.
Format show vlan brief
Mode
Format show vlan port {<slot/port> | all}
Mode

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)