NETGEAR M4100 Series ProSAFE User Manual

Management Commands
474
M4100 Series ProSAFE Managed Switches
no passwords min-length
Use this command to set the minimum password length to the default value.
passwords history
Use this command to set the number of previous passwords that shall be stored for each
user account. When a local user changes his or her password, the user will not be able to
reuse any password stored in password history. This ensures that users do not reuse their
passwords often. The valid range is 0-10.
no passwords history
Use this command to set the password history to the default value.
passwords aging
Use this command to implement aging on passwords for local users. When a user’s
password expires, the user will be prompted to change it before logging in again. The valid
range is 1-365. The default is 0, or no aging.
no passwords aging
Use this command to set the password aging to the default value.
Format no passwords min-length
Mode Global Config
Default 0
Format passwords history <0-10>
Mode Global Config
Format no passwords history
Mode Global Config
Default 0
Format passwords aging <1-365>
Mode Global Config
Format no passwords aging
Mode Global Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)