NETGEAR M4100 Series ProSAFE User Manual

Switching Commands
81
M4100 Series ProSAFE Managed Switches
clear radius statistics
This command is used to clear all RADIUS statistics.
dot1x eapolflood
Use this command to enable EAPOL flood support on the switch.
no dot1x eapolflood
This command disables EAPOL flooding on the switch.
dot1x guest-vlan
This command configures VLAN as guest vlan on a per port basis. The command specifies
an active VLAN as an IEEE 802.1x guest VLAN. The range is 1 to the maximum VLAN ID
supported by the platform.
no dot1x guest-vlan
This command disables Guest VLAN on the interface.
Format clear radius statistics
Mode Privileged EXEC
Default Disabled
Format dot1x eapolflood
Mode Global Config
Format no dot1x eapolflood
Mode Global Config
Default disabled
Format dot1x guest-vlan <vlan-id>
Mode Interface Config
Default disabled
Format no dot1x guest-vlan
Mode Interface Config

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)