Management Commands
481
M4100 Series ProSAFE Managed Switches
Command example:
(NETGEAR Switch)(config)# aaa authentication login default radius local enable none
no aaa authentication login
Use this command to remove authentication at login.
aaa authentication enable
Use this command to set authentication for accessing higher privilege levels. The default and
optional list names that you can create with this command are used with the enable
authentication command.
Create a list by specifying the <list-name> argument, using any character string to name
this list. The <method> arguments identify the list of methods that the authentication
algorithm tries in the sequence. The additional methods of authentication are used only if the
previous method returns an error, not if it fails. To ensure that the authentication succeeds
even if all methods return an error, specify
none as the final method in the command line.
For example, if none is specified as an authentication method after radius, no
authentication is used if the RADIUS server is down. \
Note: Requests sent by the switch to a RADIUS or TACACS server include
the username $enabx$, in which x is the requested privilege level.
<method1>
[<method2>...]
At least one from the following:
• enable. Uses the enable password for authentication.
• line. Uses the line password for authentication.
• local. Uses the local username database for authentication.
• none. Uses no authentication.
• radius. Uses the list of all RADIUS servers for authentication.
• tacacs. Uses the list of all TACACS servers for authentication.
Format no aaa authentication login {default | <list-name>}
Mode Global Config
Format aaa authentication enable {default | <list-name>} <method1>
[<method2>...]
Mode Global Config
Parameter Definition
To Next Page
Loading...
Need help?
General
