NETGEAR M4100 Series ProSAFE User Manual

Log Messages
537
M4100 Series ProSAFE Managed Switches
Management
Table 10. TACACS+ Log Messages
Component Message Cause
TACACS+ TACACS+: authentication error, no server
to contact
TACACS+ request needed, but no servers
are configured.
TACACS+ TACACS+: connection failed to server
x.x.x.x
TACACS+ request sent to server x.x.x.x
but no response was received.
TACACS+ TACACS+: no key configured to encrypt
packet for server x.x.x.x
No key configured for the specified server.
TACACS+ TACACS+: received invalid packet type
from server.
Received packet type that is not supported.
TACACS+ TACACS+: invalid major version in
received packet.
Major version mismatch.
TACACS+ TACACS+: invalid minor version in
received packet.
Minor version mismatch.
Table 11. LLDP Log Message
Component Message Cause
LLDP lldpTask(): invalid message type:xx.
xxxxxx:xx
Unsupported LLDP packet received.
Table 12. SNTP Log Message
Component Message Cause
SNTP SNTP: system clock synchronized on %s
UTC
Indicates that SNTP has successfully
synchronized the time of the box with the
server.
Table 13. SNMP Log Message
Component Message Cause
SNMP EDB Callback: Unit Join: x. A new unit has joined the stack.

NETGEAR M4100 Series ProSAFE Specifications

General

Product Type	Managed Switch
Form Factor	Rack-mountable
Layer	Layer 2/Layer 3
Management	Web-based, CLI, SNMP
VLAN Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, 802.1x
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	32°F to 122°F (0°C to 50°C)
Storage Temperature	-20° to 70° C (-4° to 158° F)
PoE Support	Yes (on select models)