NETGEAR M4100 Series ProSAFE

Utility Commands
439
M4100 Series ProSAFE Managed Switches
udld enable (Interface Config)
This command enables UDLD on the specified interface.
no udld enable (Interface Config)
This command disables UDLD on the specified interface.
udld port
This command selects the UDLD mode operating on this interface. If you do not enter the
aggressive keyword, the port operates in normal mode.
udld reset
This command resets all interfaces that have been shutdown by UDLD.
show udld
This command displays either the global UDLD settings or the UDLD settings for a specified
<slot/port>. If the all keyword is entered, the command displays information for all
ports.
• Privileged EXEC
• User EXEC
Default disabled
Format udld enable
Mode
Interface Config
Format no udld enable
Mode Interface Config
Default normal
Format udld port [aggressive]
Mode Interface Config
Format udld reset
Mode Privileged EXEC
Format show udld [<slot/port> | all]
Mode