Switching Commands
84
M4100 Series ProSAFE Managed Switches
authenticator PAE sets the controlled port mode to reflect the outcome of the authentication
exchanges between the supplicant, authenticator, and the authentication server. If the
mac-based option is specified, MAC-based dot1x authentication is enabled on the port.
no dot1x port-control all
This command sets the authentication mode on all ports to the default value.
dot1x re-authenticate
This command begins the re-authentication sequence on the specified port. This command is
only valid if the control mode for the specified port is “auto” or “mac-based”. If the control
mode is not “auto” or “mac-based”, an error will be returned.
dot1x re-authentication
This command enables re-authentication of the supplicant for the specified port.
no dot1x re-authentication
This command disables re-authentication of the supplicant for the specified port.
Default auto
Format dot1x port-control all {force-unauthorized | force-authorized | auto
| mac-based}
Mode Global Config
Format no dot1x port-control all
Mode Global Config
Format dot1x re-authenticate <slot/port>
Mode Privileged EXEC
Default disabled
Format dot1x re-authentication
Mode Interface Config
Format no dot1x re-authentication
Mode Interface Config