Management Commands
465
M4100 Series ProSAFE Managed Switches
ip http secure-session hard-timeout
Use this command to configure the hard time-out for secure HTTP sessions in hours. When
the time-out expires, the user must reauthenticate. This timer begins on initiation of the web
session and is unaffected by the activity level of the connection. The secure session hard
time-out cannot be set to zero (infinite).
no ip http secure-session hard-timeout
Use this command to reset the hard time-out for secure HTTP sessions to the default value.
ip https authentication
Use this command to specify the authentication methods for http server users. The additional
methods of authentication are used only if the previous method returns an error, not if it fails.
To ensure that the authentication succeeds even if all methods return an error, specify none
as the final method in the command line. If none is specified as an authentication method
after
radius, no authentication is used if the RADIUS server is down.
no ip https authentication
Use this command to restore the authentication methods to the default for http server users.
Default 24
Format ip http secure-session hard-timeout <1-168>
Mode Privileged EXEC
Format no ip http secure-session hard-timeout
Mode Privileged EXEC
Format ip https authentication <method1> [<method2> ...]
Mode Global Config
Term Definition
Local Uses the local user name database for authentication.
Radius Uses the list of all RADIUS servers for authentication.
Tacacs Uses the list of all TACACS servers for authentication.
None Uses no authentication.
Format no ip https authentication <method1> [<method2> ...]
Mode Global Config
To Next Page
Loading...
Need help?
General
