NETGEAR M4100 Series ProSAFE

Management Commands
521
M4100 Series ProSAFE Managed Switches
set prompt
Use this command to change the name of the prompt. The length of name might be up to
64
alphanumeric characters.
set clibanner
Use this command to add the CLI Banner. The banner message supports up to 2000
characters.
no set clibanner
Use this command to remove the CLI Banner downloaded through TFTP.
Format copy <url> nvram:clibanner
or
copy nvram:clibanner <url>
Mode Privileged EXEC
Format set prompt <prompt_string>
Mode Privileged EXEC
Format set clibanner <line>
Mode Global Config
Format no set clibanner
Mode Global Config